24-Month Warranty
All Ihle parts backed by warranty
Easy Delivery
Fast delivery or in store pickup
Easy returns
Contact us for returns
CHEAPER THAN OEM
Made with Hardox wear steel
INSTALLATION ASSISTANCE
Ihle Fabrications provides our growers with instructions and installation help.
HARDOX® WEAR PLATE
Our wear parts are made with the best steel on the market. It won't bend. It won't dent.
CNH REMAN PARTNER
We are a certified CNH Reman partner on parts for Case & New Holland Combines.
OUR WEAR PART BRANDS
OUR WEAR PARTS
-
John DeereJohn Deere Feeder Accelerator & Discharge Beater Blade, Notched
These notched wear plates are made of Hardox® 500 Tuf for John Deere S Series and STS Series Combines. This kit contains (1) wear plate, (2) M10 x 30 carriage bolts and (2) M10 flanged serrated nuts, everything you need for an easy installation.
Replaces OEM H165407.
*Dealers, call for quantity pricing break.
(1 review) -
DragoDrago Series I & II Corn Head Protector – 2 Piece Inner Row Repair Kit
The Drago Series I & II Inner Row Corn Head Snout plates cover up holes and wear on your Drago Series I or II Corn Head. Made of 16-gauge stainless steel, this protector plate kit includes a right hand liner, a left hand liner and 24 rive nuts, screws and washers for complete assembly of one row.
*Dealers, call for quantity pricing break.
Click here to see our installation video.
(0 reviews) -
John DeereJohn Deere Threshing Separator Cover – First Section – Patch
Ihle’s liner is an OEM enhancement for your Threshing Separator Cover, First Section. This patch kit for the first section of your separator cover is made of Hardox® 450 which means this part is designed to help your OEM last longer during the harshest harvest conditions. Recommended one to three patches per machine (three will cover the entire separator cover). Simply cut this part to the size you need to cover your wear, or weld three on the entire cover for added protection.
Lines OEM AH208967 and AH208966.
*Dealers, call for quantity pricing break.
(0 reviews) -
AugerJohn Deere Extended Wear Bubble-Up Auger
Ihle’s long anticipated bubble auger is ready! This auger is made with Hardox® 450 steel flighting – a material 2.5 times stronger than the OEM for an extended wear life on this heavily relied upon combine part. Pre-balanced before shipping, and with Ihle’s 24-month warranty, you can count on this auger to keep you up and running this fall.
This part replaces John Deere OEM AH230013.
*Dealers, call for quantity pricing break.
(0 reviews) -
Crop Storage & UnloadingJohn Deere Bubble-Up Liner Kit (Extended Length 53-1/4″ x 12″)
This bubble-up liner kit, made of mild steel, offers comprehensive protection for your unloading system. Ihle’s steel bubble liners are designed for effortless installation as slip-in liners. The process is simple: remove the auger, slide the bubble up in place, and bolt it securely for added protection. All Ihle bubble-ups are readily available in stock and ready to ship.
This liner fits John Deere OEM AXE56594 and AXE83882.
*Dealers, call for quantity pricing break.
(0 reviews) -
Cat, Claas, LexionCat, Claas, Lexion Grain Tank Floor Liner Kit
The Cat, Claas, Lexion grain tank floor liner kit comes with four liner pieces and all the hardware you need to install. If you have started harvesting and found your grain tank floor is leaking grain, our easy to install grain tank floor liners cuts repair time and cost down significantly.
This part lines the grain tank OEM on Cat, Claas, Lexion combines.
*Dealers, call for quantity pricing break.
(0 reviews) -
John DeereJohn Deere Threshing Separator Cover – Second Section – Patch
Ihle’s liner is an OEM enhancement for your Threshing Separator Cover, Second Section. This patch kit for the second section of your separator cover is made of Hardox® 450 which means this part is designed to help your OEM last longer during the harshest harvest conditions. Recommended one to three patches per machine (three will cover the entire separator cover). Simply cut this part to the size you need to cover your wear, or weld three on the entire cover for added protection.
Lines OEM AXE10277, AH233235, AXE24648 and AXE24647.
*Dealers, call for quantity pricing break.
(0 reviews) -
Crop Storage & UnloadingJohn Deere Bubble-Up Liner Kit (Length 45″ x 12″)
Ihle’s bubble-up liner kit is designed specifically for STS and S Series John Deere combines. Made from mild steel, this steel kit includes all the necessary hardware for effortless installation. Ihle’s steel bubble-up liners are remarkably easy to install: remove the auger, slide the bubble-up into position, and bolt it in place to provide additional protection for your unloading system. These bubble-ups are available in stock and ready for immediate shipment.
This liner fits John Deere OEM AXE56593, AXE83881 and AH217983.
*Dealers, call for quantity pricing break.
(0 reviews) -
Feeder HouseJohn Deere Feeder Drum Wear Plates (8 Piece)
Made with Strenx® performance steel, Ihle’s 8-piece, 8″ diameter feeder drum wear plates are designed to fit the OEM and provide additional support where the feeder chains rub and cause wear on the feeder drum. This part was built to extend the life of your feeder drum and comes as a full kit with 4 sets of wear plates, cut in half, for a total of 8 pieces.
Lines OEM AXE87970.
*Dealers, call for quantity pricing break.
(0 reviews) -
GleanerGleaner Grain Tank Auger Floor Liner
Ihle Fabrications created a grain tank auger floor liner for the Gleaner brand of combines. This 4-piece liner kit rivets to the original grain tank floor to give you an easy installation and added protection against leaks in your combine grain tank system. This kit includes all pieces and hardware needed to install.
This part lines the grain tank OEM on Gleaner combines.
*Dealers, call for quantity pricing break.
(0 reviews)
-
ConcavesJohn Deere Round Bar Concaves-Front
At Ihle Fabrications, we’ve developed a high-performance OEM enhancement part for the John Deere Combine threshing area. Our Round Bar Concaves are crafted from durable Hardox® 500 Tuf and feature 5/8″ Round Bar, designed to extend the life of your concaves. These innovative concaves improve the separation of grain and fodder, ensuring that no grain is left unseparated.
This part replaces John Deere OEM AXE28955.
(0 reviews) -
John DeereJohn Deere Threshing Separator Cover – Second Section – Tailings Return
Ihle introduces an OEM replacement for the Threshing Separator Cover, specifically designed with a Section Section featuring Tailings Return functionality. Made from Hardox® 500 Tuf, this second section ensures extended durability, surpassing that of the OEM, and is engineered to withstand even the most rigorous harvest conditions. For added convenience, the part includes all necessary bolts and washer hardware, facilitating effortless installation.
This part replaces OEM AH208573 or AH208575.
*Dealers, call for quantity pricing break.
(0 reviews) -
ConcavesJohn Deere Round Bar Concaves-Middle/Rear
At Ihle Fabrications, we’ve developed a high-performance OEM enhancement part for the John Deere Combine threshing area. Our Round Bar Concaves are crafted from durable Hardox® 500 Tuf and feature 5/8″ Round Bar, designed to extend the life of your concaves. These innovative concaves improve the separation of grain and fodder, ensuring that no grain is left unseparated.
This part replaces John Deere OEM AXE28957.
(0 reviews) -
Corn HeadJohn Deere Adjustable Left Hand Snapping Plate
Give your John Deere Corn Head a much needed upgrade when you add Ihle’s row unit adjustable snapping plate. Made out of Hardox® 500 Tuf to ensure this part lasts, our corn head replacement parts will help you go the extra acres.
This part replaces John Deere OEM AH234656.
*Dealers, call for quantity pricing break.
(0 reviews) -
Crop Storage & UnloadingJohn Deere Bubble-Up Liner Kit – Length 44″ x 9-7/16″
Line your combine and be prepared for more acres this fall with Ihle’s bubble-up liner kit. To install, remove your auger, slide the bubble up into position, and secure it with bolts for enhanced protection of your unloading system. With bubble ups available in stock, they’re ready to ship when you need them.
This liner fits John Deere OEM AH135444.
*Dealers, call for quantity pricing break.
(0 reviews) -
Corn HeadJohn Deere Row Unit Chain Guide Plate
Give your John Deere Corn Head a much needed upgrade when you add Ihle’s row unit chain guide plate. Made out of Hardox® 500 Tuf to ensure this part lasts, our corn head replacement parts will help you go the extra acres.
This part replaces John Deere OEM H237437.
*Dealers, call for quantity pricing break.
(0 reviews)
ihle News
The Importance of Quality Combine Wear Parts for Maximizing Harvest Efficiency
Farmers are currently in the fields, fighting the elements, to finish [...]
Top 5 Reasons Why Ihle Fabrications Trusts Hardox® wear steel
At Ihle Fabrications, we take pride in delivering high-quality [...]
Ihle Fabrications to Exhibit at the National Farm Machinery Show
Polk City, Iowa – Feb. 2024 Ihle Fabrications, a renowned name in [...]
New Website Launch
Ihle Fabrications Unveils User-Centric Website Redesign for January [...]